| Threaded connection | In the SI system | In Pound Feet |
| Screw for fastening the ground conductor to the gearbox | 25 Nm | 18 ft·lbs |
| Screws for fastening the left engine support to the body (KV6 engine) | 48 Nm | 35 ft·lbs |
| Fastening the 1st gear switch to the gearbox | 24 Nm | 18 ft·lbs |
| Gearbox drain plug | 35 Nm | 26 ft·lbs |
| Torx Screws for Rear Gearbox Cover | 25 Nm | 18 ft·lbs |
| Gearbox filler/inspection plug | 35 Nm | 26 ft·lbs |
| Gearbox Cover Screws | 10 Nm | 7 ft·lbs |
| Gearbox to engine mounting screws | 85 Nm | 63 ft·lbs |
| Gearbox mounting screws to left engine mount (KV6 engine) | 85 Nm | 63 ft·lbs |
| Gear Shift Cover Screws | 25 Nm | 18 ft·lbs |
| Screws for fastening the support bracket to the gearbox | 85 Nm | 63 ft·lbs |
| Screws for fastening the support bracket to the gearbox | 100 Nm | 74 ft·lbs |
| Through screw for securing the transmission support bracket to the engine support | 100 Nm | 74 ft·lbs |
| Gearbox to engine mounting screws | 85 Nm | 63 ft·lbs |
| Torx Screws for Rear Gearbox Cover + | 25 Nm | 18 ft·lbs |
| Torx screws for securing the shift mechanism cover to the gear selector shaft + | 25 Nm | 18 ft·lbs |
| Screws securing the left engine mount to the gearbox bracket | 100 Nm | 74 ft·lbs |
| Release Bearing Sleeve Screws | 12 Nm | 9 ft·lbs |
| Fastening the reversing light switch to the gearbox | 24 Nm | 18 ft·lbs |
+ Apply sealant, part no. STC 4600 to threads.
The material was taken from the specified website: www.lrman.ru
Comments on this article