| Threaded connection | In the SI system | In Pound Feet |
| Steering rod ball joint nuts | 55 Nm | 41 ft·lbs |
| Coolant line fastening screws to cylinder block (KV6 engine) | 9 Nm | 7 ft·lbs |
| Screws for fastening the gear shift rods to the bulkhead (Td4 engine with manual transmission) | 25 Nm | 18 ft·lbs |
| Heat shield nuts (KV6 engine) | 25 Nm | 18 ft·lbs |
| Fastening the locking cable to the column assembly (JATCO automatic transmission) | 4 Nm | 3 ft·lbs |
| Intermediate reduction gear hose retainer screw (Td4 engine) | 25 Nm | 18 ft·lbs |
| Ignition Key Lock Cable Retainer Screw (JATCO Automatic Transmission) | 6 Nm | 4.5 ft·lbs |
| Screw securing the power steering pipe retainer to the engine mounting eye | 10 Nm | 7.5 ft·lbs |
| Power Steering High Pressure Line Screw | 8 Nm | 6 ft·lbs |
| Power Steering Line Retainer Screws | 10 Nm | 7.5 ft·lbs |
| Screw for the nipple of the return hose to the power steering pump (engines KV6 and K1.8) | 20 Nm | 15 ft·lbs |
| Screw for the nipple of the return hose to the power steering pump (engine Td4) | 25 Nm | 18 ft·lbs |
| Power steering fluid return hose retainer screw | 22 Nm | 16 ft·lbs |
| Power steering pipe clamp screw | 22 Nm | 16 ft·lbs |
| Screw for fastening the power steering pipe to the front mounting plate (KV6 engine) | 25 Nm | 18 ft·lbs |
| Nut securing bracket for power steering line to right hydraulic support (KV6) | 85 Nm | 63 ft·lbs |
| Right Power Steering Pipe Rotary Lock Screw | 10 Nm | 7.5 ft·lbs |
| Power steering pump high pressure line nipple | 25 Nm | 18 ft·lbs |
| Power steering pump pulley mounting bolts | 10 Nm | 7.5 ft·lbs |
| Screws for fastening the power steering pump to the bracket (KV6 and K1.8 engines) | 25 Nm | 18 ft·lbs |
| Power steering pump mounting screws to bracket (Td4 engine) | ||
| - M6 | 10 Nm | 7.5 ft·lbs |
| - M8 | 25 Nm | 18 ft·lbs |
| Power steering pump mounting screws to cylinder block | 45 Nm | 33 ft·lbs |
| Power steering pipe union nut | 18 Nm | 13 ft·lbs |
| Power steering return line nipple nut | 22 Nm | 16 ft·lbs |
| Power steering mounting screws | 45 Nm | 33 ft·lbs |
| Power steering actuator cylinder line nuts | ||
| - Small diameter (6 mm) | 18 Nm | 13 ft·lbs |
| - Large diameter (10 mm) | 24 Nm | 18 ft·lbs |
| Steering wheel position change mechanism lock bolt and nut | 10 Nm | 7.5 ft·lbs |
| Steering wheel position change mechanism lock bolt and nut | 12 Nm | 9 ft·lbs |
| Steering column bracket side screw | 10 Nm | 7.5 ft·lbs |
| Steering column lock bolt | crush bolts | |
| Steering column to control panel crossmember mounting nuts and bolts | 14 Nm | 10 ft·lbs |
| Steering shaft and steering gear connecting clamp tightening bolt | 32 Nm | 24 ft·lbs |
| Steering wheel mounting nut | 45 Nm | 33 ft·lbs |
| Nuts connecting longitudinal and transverse steering rods | 55 Nm | 41 ft·lbs |
| Tie Rod End Clamp Screw * | 28 Nm | 21 ft·lbs |
| Screws for fastening the transverse rod to the steering gear | 100 Nm | 74 ft·lbs |
| Tie nuts | 90 Nm | 66 ft·lbs |
* Tighten with suspension loaded with vehicle weight.
Details can be found on the website: www.LRman.ru
Comments on this article