| Threaded connection | In the SI system | In Pound Feet |
| Screws for fastening the clutch slave cylinder bracket to the gearbox | 25 N·m | 18 ft·lbs |
| Drain plug | 35 N·m | 26 ft·lbs |
| Filler/inspection plug | 35 N·m | 26 ft·lbs |
| 1st gear switch | 24 N·m | 18 ft·lbs |
| Bolt and nut for fastening the front cover to the gearbox | 9 N·m | 7 ft·lbs |
| Gearbox to engine mounting screws + | 80 Nm | 59 ft·lbs |
| Screws for fastening the pan to the gearbox housing | 45 N·m | 33 ft·lbs |
| Screw securing gear shift rod to bracket | 25 N·m | 18 ft·lbs |
| Screw for fastening the bracket to the gearbox | 45 N·m | 33 ft·lbs |
| Left engine mount to gearbox mounting screws | 65 N·m | 48 ft·lbs |
| Left engine mount to gearbox mounting screws | 80 N·m | 59 ft·lbs |
| Reverse light switch | 24 N·m | 18 ft·lbs |
+ Apply sealant, part # STC 50552 to the threads of the top two screws.
Comments on this article