Dismantling
1. Disconnect "negative" battery terminal.
2. Remove the inlet receiver.
MANIFOLDS AND EXHAUST SYSTEM: MOD. K, move. V6, REPAIRS, Intake reservoir seals: vehicles manufactured before May 2003.
3. Turn away 2 bolts of fastening of the heat-shielding screen of the right back timing belt to a head of cylinders and remove the screen.
4. Turn away 3 bolts of fastening of a cover of the right back timing belt and remove a cover.
Installation
1. Wipe right rear timing belt cover.
2. Replace the cover of the right rear timing belt, screw in the bolts and tighten them to a torque of 4 Nm.
3. Install the heat shield, screw in the bolts and tighten the M6 bolts to 9 Nm and the M8 bolts to 25 Nm.
4. Install intake reservoir.
MANIFOLDS AND EXHAUST SYSTEM: MOD. K, move. V6, REPAIRS, Intake reservoir seals: vehicles manufactured before May 2003.
5. Attach "negative" battery terminal.
Comments on this article