Mixing chamber (Freelander 2)

Removal

1. Remove the right windshield wiper arm. Refer to procedure: Wiper Arm (501-16 Windshield Wipers and Washers, Removal and Installation).

2. Repeat the above procedure on the other lever.

2. Repeat the above procedure on the other lever.

5. Remove the collection chamber panel.

WARNING: This step requires the assistance of a second mechanic.

NOTE: Do not perform further disassembly if the component is removed only for access.

NOTE: Do not perform further disassembly if the component is removed only for access.

Installation

1. When installing, perform the removal procedure in reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Roman Mitrofanov

Climate control specification
Description and principle of operation
Heating and ventilation
Air conditioning
Control Components
Microclimate control scheme
Principles of microclimate operation
Interior Blower Motor Resistor

Current article

Mixing chamber

Thermostatic expansion valve
Temperature sensor on the surface of the evaporator
Heater core
Capacitor
Outside air temperature sensor
Air conditioning compressor
Heater core and evaporator core housing
Air Conditioning (A/C) Pressure Sensor

Comments on this article

No comments yet

Freelander 2

Freelander 1