Check - Figure 8
Technical conditions
| Temperature | Resistance |
| 0°C | 5700-5900 Ohm |
| 20°C | 2400-2600 Ohm |
| 40°C | 1100-1300 Ohm |
| 60°C | 500-700 Ohm |
| 80°C | 300-400 Ohm |
| 100°C | 150-200 Ohm |
Make sure the ignition is off.
Disconnect the fuel temperature sensor electrical connector.
Remove the fuel temperature sensor.
Place the sensor in water of known temperature. Measure the resistance between the sensor contacts.
Comments on this article