Brake disc (Discovery 1)

Removal

1. Remove the wheel hub.

2. Unscrew the brake disc mounting bolts.

3. Remove the disc.

Installation

4. Install the disc on the hub.

5. Apply Loctite 270 adhesive to the threads of the disc mounting bolts and tighten the bolts to a torque of 75 N·m.

6. Check the disc runout at the periphery. If the runout exceeds 0.15 mm, move the disc to another position.

7. Install the hub.

Disc repair

8. Restoring the disc surface by mechanical processing is permitted up to a thickness of 13 mm. The metal removal thickness must be equal on both sides.