Removing
1. Remove the lower C-pillar trim panel
For more information, refer to Lower Pillar Trim Panel (76.13.34)
2. For vehicles with 7 seats: release the seat belt. Loosen and discard the bolt.
3. Remove the top panel of finishing of a rack of a back door.
- Release 4 clips.
- Disconnect the electrical connector.
4.
NOTE: Do not proceed with further disassembly if the part is being removed only for access.
Remove the speaker. Remove 3 screws.
Installation
1. Reinstall the components in reverse order. Tighten a new Torx head bolt (tightening torque 40 Nm).
Comments on this article