Headlight adjustment (Discovery 3)

NOTE: Use the self-leveling suspension to set the vehicle to standard ride height.

NOTE: The headlamp beams should be parallel and 1.2% below the horizontal.

NOTE: North American market vehicles have vertical adjustment only.

1. Install the headlight beam adjustment equipment opposite one of the headlights.

2. Turn on the low beam.

3.

NOTE: North American market vehicles have vertical adjustment only.

Adjust the headlights with a Philips screwdriver.

• To adjust in the vertical plane, turn regulators A and B to the same angle.
• To adjust the horizontal plane, turn the regulator A or B.

[The material was taken from the specified website www.lrman.ru]


4. Repeat the above procedure to adjust the second headlight.