Rear Exhaust Pipe 4.4L (Discovery 3)

Special tool

Exhaust Pipe Cutter 100-051 (LRT-99-027)

Removal

1.

CAUTION: Never work on a vehicle supported only by a jack. Always support the vehicle with special stands.

Raise and support the vehicle.

2. Remove the exhaust pipe.

• Using 100-051, cut the exhaust pipe at the location indicated by the recess on the exhaust pipe.
• Disconnect the exhaust pipe from its mounting.

Installation

1.

NOTE: Do not tighten the clamp at this stage.

Install the exhaust pipe.

• Clean the parts.
• Install the clamp.

2. Align the exhaust pipe and tighten the clamp. (tightening torque 55 Nm).