Dismantling
1. Disconnect "negative" battery terminal.
2. Remove the upper arm.
KV6 ENGINE - MODIFICATION K, Left cylinder head camshafts, Right engine support bracket assembly.
3. Using a 3/8 square lever, move the accessory belt tensioner up and remove the belt from the alternator pulley.
4. Loosen the battery wire attachment cover, loosen the terminal and disconnect the wire from the terminal.
5. Disconnect the connector from the generator.
6. Remove the bottom bolt and top nut securing the alternator to the front mounting plate.
7. Remove the generator.
Installation
1. Install the generator on the front mounting plate.
2. Install the bolt and nut and bolt securing the alternator to the front mounting plate and tighten to 45 Nm.
3. Using a 3/8 square lever, move the accessory belt tensioner up and install the belt off the alternator pulley.
4. Connect the generator connector.
5. Install the battery wire to the alternator, tighten the nut to 10 Nm and reinstall the battery wire cover.
6. Install the upper arm.
KV6 ENGINE - MODIFICATION K, Left cylinder head camshafts, Right engine support bracket assembly.
7. Attach "negative" battery terminal.
Comments on this article