Dismantling
1. Remove the battery.
SYSTEM OF STARTING THE ENGINE AND CHARGING THE BATTERY, REPAIR WORKS Accumulator battery.
2. Models with cruise control installed: Disconnect the connector and tube from the steering vacuum pump, if installed.
3. Release the cable harness clips from the battery support tray.
4. Remove 4 bolts and battery support tray.
5. Models with cruise control installed: Remove the cruise control vacuum pump and bracket from the support tray, if installed.
Installation
1. Models with cruise control installed: Install the cruise control mount and vacuum pump to the battery support tray.
2. Install the support tray and tighten the screws with a tightening torque of 10 Nm.
3. Attach the cable harness clips to the battery support tray.
4. Models with cruise control installed: Connect the connector and tube to the cruise control vacuum pump if fitted.
5. Install the battery.
ENGINE START AND CHARGING SYSTEM, REPAIR WORKS, Accumulator battery.
Comments on this article