Contents: Removal ⇩ Installation ⇩
Removal
1.
CAUTION: First release the 2 lower clamps using the access holes.
Install the handrail cover. Release the 4 clips.
2. Release the front door trim panel.
- Remove the 2 screw covers.
- Remove 8 screws.
- Release 12 clamps.
3. Disconnect the remote door lock opening system cable.
4. Remove the front door trim panel. Disconnect 7 electrical connectors.
5.
NOTE: Do not perform further disassembly if the part is removed only for access.
Remove the remote door lock handle. Starting from the bottom edge, carefully release the remote door lock handle.
6. Remove the threshold lighting lamp. Carefully remove the bulb.
7. Remove the tweeter. Release the 3 clips.
8. Remove the mirror control switch. Release the 2 clips.
9. Remove the speaker. Remove the 3 Torx head screws.
10. Remove the window control switch. Carefully release the 4 clips.
11. Remove 12 clamps.
Installation
1. Install the window control switch. Engage the clips.
2. Install the speaker. Tighten the Torx head screws.
3. Install the mirror control switch. Engage the clamps.
4. Install the tweeter. Engage the clamps.
5. Install the threshold lighting lamp.
6. Install the front door remote control handle.
7. Install the clamps.
8. Install the front door trim panel.
- Connect the electrical connectors.
- Connect the door lock control cable.
- Engage the clamps.
- Tighten the screws.
- Install the screw cover.
Comments on this article