Brake fluid reservoir (Discovery 3)

Removal

All cars

1. Remove the cover.



2. Place an absorbent cloth to absorb any spilled liquid.

3. Disconnect the low brake fluid level indicator switch electrical connector.

Cars with manual transmission

4.

CAUTION: To avoid contamination of the system, plug all open connections.

Disconnect the clutch master cylinder feed line.

All cars

5.

CAUTION: To avoid contamination of the system, plug all open connections.

Remove the brake fluid reservoir.

• Release the 2 clamps.
• Remove and discard the 2 brake fluid reservoir seals.

Installation

All cars

1. Clean the parts.

2. Install the brake fluid reservoir. Install new brake fluid reservoir seals.

Cars with manual transmission



3. Connect the clutch master cylinder supply line.

All cars

4. Connect the low brake fluid level indicator switch electrical connector.

5. Use T4 to bleed the brake system. For more information, refer to Bleeding the Brake System (70.25.02)

Cars with manual transmission

6. Bleed the clutch hydraulic system. For more information, refer to Bleeding the Clutch System