Manifold Absolute Pressure (MAP) Sensor 4.4L (Discovery 3)

Removal

1. Disconnect the ground cable from the battery. For more information, refer to Specification.

2. Remove the engine cover. For more information, refer to Engine Cover - 4.4L (12.30.50)

3. Remove the manifold absolute pressure (MAP) sensor.

• Disconnect the plug connector.
• Remove 2 Torx head screws.

Installation

1. To install, perform the removal procedure in reverse order. Clean the contact surfaces of the parts.

The material was taken from the specified website (LRMAN.RU)