Contents: Operating procedure ⇩ Filling ⇩
Operating procedure
1. Place the vehicle on a lift.
2. Remove the lower engine guard.
EXTERIOR PARTS, REPAIR WORK, Lower engine protection shield.
3. Place a container under the gearbox to collect the transmission oil.
4. Clean the area around the filler/inspection plug and the oil drain plug.
CAUTION: Use caution when draining transmission fluid, which may be very hot.
(The article was copied from a resource: www.lrman.ru)
5. Remove the filler/inspection plug.
6. Unscrew the drain plug.
7. Allow the oil to drain completely.
Filling
1. Clean the filler/inspection and drain plugs.
2. Screw the drain plug into the gearbox and tighten it to a torque of 35 Nm.
3. Pour oil into the gearbox through the filler/inspection hole up to its lower edge.
FILLING CAPACITIES, LIQUIDS AND OILS, Lubrication system.
4. Screw the filler/inspection plug into the gearbox and tighten it to a torque of 35 Nm.
5. Reinstall the lower engine guard.
EXTERIOR PARTS, REPAIR WORK, Lower engine protection shield.
6. Lower the vehicle.
Comments on this article