2. Disconnect the blind of the sunroof opening panel from the rails. Rotate the left corner counterclockwise and release the right corner from the frame.
NOTE: Rotate the sunroof opening panel in the direction shown in the illustration.
3. Open the blind of the sunroof opening panel.
4. Detach the sunroof opening panel shade from the support bracket and remove the sunshade from the vehicle.
- Slide the sunroof opening panel curtain into the frame to release the left spring axle.
- Rotate the blind of the sunroof opening panel counterclockwise.
- Remove the blind of the sunroof opening panel.
5. Roll up the sunroof opening panel.
- Using a suitable tool, hold and rotate the spring-loaded axle.
- Insert the spring-loaded axle into the blind of the sunroof opening panel and align with the fixing holes.
- Using a suitable hairpin or paper clip (see picture) fix the spring-loaded axle.
NOTE: The opening sunroof panel must be rotated 7 turns.
6. Install the sunroof opening panel curtain into the frame. With the sunroof opening panel shade correctly installed, remove the pin (paperclip) from the curtain.
NOTE: Make sure the spring-loaded axle is correctly positioned in the sunroof opening panel frame. Make sure the stud or paper clip stays in place when the sunroof opening panel curtain is installed.
7. Install the sunroof opening panel curtain rails into the guides.
- Insert the right sunroof opening panel blind slide into the guide.
- Insert the left skid clockwise into the guide.
8. Open the blind of the sunroof opening panel and check for correct operation.
Comments on this article