Contents: Removal ⇩ Installation ⇩
Removal
CAUTION: DO NOT press the brake pedal during this operation. Failure to do so may result in damage to the brake light switch.
1. Remove the decorative panel.
- Release the clamp.
- Remove two screws.
- Disconnect the electrical connector.
2. Remove the brake light switch.
- Disconnect the electrical connector.
- Turn the switch clockwise.
Installation
1.
CAUTION: DO NOT press the brake pedal during this operation. Failure to do so may result in damage to the brake light switch.
Install the brake light switch.
- Turn the switch counterclockwise.
- Connect the electrical connector.
The article is based on data from the website (lrman.ru)
2. Install the decorative panel.
- Connect the electrical connector.
- Secure the clamp.
- Tighten the screws.
Comments on this article