| Item name | Spare part catalog number | Description |
| 1 | - | Piston rings |
| 2 | - | Piston |
| 3 | - | Retaining ring |
| 4 | - | Connecting rod |
| 5 | - | Bolts |
| 6 | - | Connecting rod bearing shells |
| 7 | - | Bearing |
| 8 | - | Piston pin |
| 9 | - | Retaining ring |
| 10 | - | Cylinder block |
| 11 | - | Pistons |
| 12 | - | Bolts |
| 13 | - | Flywheel |
| 14 | - | Sealing ring |
| 15 | - | Pin |
| 16 | - | Crankshaft |
| 17 | - | Thrust washer |
| 18 | - | Thrust washer |
| 19 | - | Bearing insert - upper |
| 20 | - | Bearing insert - lower |
| 21 | - | Oil dipstick tube |
| 22 | - | Oil dipstick |
| 23 | - | Base plate |
| 24 | - | Bolts |
| 25 | - | Bolts |
| 26 | - | Aerodynamic tray |
| 27 | - | Bolts |
| 28 | - | Bolts |
| 29 | - | Bolts |
| 30 | - | Bolt |
| 31 | - | Bolt |
| 32 | - | Oil suction pipe |
| 33 | - | Bolts |
| 34 | - | Oil pan |
| 35 | - | Bolts |
| 36 | - | Bolts |
| 37 | - | Bolts |
| 38 | - | Oil filter |
| 39 | - | Oil radiator assembly |
| 40 | - | Bolts |
| 41 | - | Oil filter head assembly |
| 42 | - | Seals |
| 43 | - | Bolts |
| 44 | - | Oil pump |
| 45 | - | Crankshaft bolt |
| 46 | - | Cone bushing |
| 47 | - | Crankshaft pulley |
| 48 | - | Crankshaft sprocket |
The cylinder block has a "closed" V-shaped design, providing high internal rigidity and low vibration. The small volume of the cooling jacket reduces warm-up time and piston noise levels.; the longitudinal direction of the cooling jacket channels with one hole in the cylinder head for supplying coolant in each row increases rigidity and improves the fit of the cylinder head gasket. The right cylinder bank has the index "A" (cylinders 1 to 4), and the left row of cylinders is index "B" (cylinders 5 to 8).
[The article was taken from this resource: www.lrman.ru]
Comments on this article