Dismantling
1. Remove the side trim of the front seat cushion.
SEATS, REPAIRS, Front seat cushion side trim.
2. Remove the self-tapping screw and 5 Torx screws from the carpet attachment strip and remove the strip.
3. Unfasten the upper decorative panel of the 'B/C' pillar.
4. Remove the 3 Torx screws securing the top of the seat base trim.
5. Remove the self-tapping screw and Torx screw from the bottom trim panel of the 'B/C' pillar.
6. Loosen the 'B/C' pillar lower trim panel and remove it from the seat base trim.
Installation
1. Install the 'B/C' pillar lower trim panel, positioning its bottom edge under the seat base trim and rear flooring attachment rail.
2. Install a self-tapping screw and a Torx screw into the bottom trim panel of the 'B/C' pillar.
3. Install the Torx screws into the seat base trim.
4. Install and secure the 'B/C' pillar top trim panel.
5. Establish a lateral overlay of a pillow of a forward seat.
SEATS, REPAIRS, Front seat cushion side trim.
6. Install the carpet fixing bar. Secure it with Torx screws and a self-tapping screw.
Comments on this article