| Threaded connection | In the SI system | In Pound Feet |
| Allen Air Filter Cover Mounting Screws | 8 Nm | 6 ft·lbs |
| Screws for fastening the condenser to the radiator | 3 Nm | 2.2 ft·lbs |
| Bolts and nuts for fastening the filler neck to the body | 9 Nm | 6.5 ft·lbs |
| Screws for fastening the fuel heat exchanger to the bracket | 10 Nm | 7 ft·lbs |
| Nuts securing the heat exchanger radiator to the bonnet lock plate | 10 Nm | 7 ft·lbs |
| Nuts for fastening the fuel supply switch during engine braking to the bracket | 2 Nm | 1.5 ft·lbs |
| Injector retainer nuts | 10 Nm | 7 ft·lbs |
| Fuel line fitting nuts | 20 Nm | 15 ft·lbs |
| High pressure fuel pump nuts | 24 Nm | 18 ft·lbs |
| High pressure fuel pump drive sprocket nuts | 65 Nm | 48 ft·lbs |
| Injector brackets | 10 Nm | 7 ft·lbs |
| Fuel Pressure Regulator Torx Screws | 9 Nm | 6.5 ft·lbs |
| Fuel pressure sensor | 38 Nm | 28 ft·lbs |
| Locking ring for fastening the fuel pump unit and the pipe to the tank | 35 Nm | 26 ft·lbs |
| Fuel rail mounting screws to bracket | 10 Nm | 7.5 ft·lbs |
| Allen Fuel Rail Screws | 24 Nm | 18 ft·lbs |
| Fuel tank to body mounting screws | 45 Nm | 33 ft·lbs |
| Glow plugs | 20 Nm | 15 ft·lbs |
| Nuts for high pressure pipeline fittings | 20 Nm | 15 ft·lbs |
| Screws for fastening the intercooler to the radiator | 3 Nm | 2.2 ft·lbs |
| Low pressure fuel line mounting screws | 10 Nm | 7 ft·lbs |
| Inspection plug of the valve timing adjustment housing | 30 Nm | 22 ft·lbs |
| Turbocharger control solenoid valve bracket mounting screws to turbocharger housing | 10 Nm | 7 ft·lbs |
| Nuts securing the turbocharger control solenoid valve to the rubber support | 5 Nm | 3.7 ft·lbs |
| Screw securing turbocharger pressure sensor to intake manifold | 8 Nm | 6 ft·lbs |
| Turbocharger Oil Drain Pipe Fastening Screws | 20 Nm | 15 ft·lbs |
| Turbocharger Oil Drain Pipe Flange Screws | 8 Nm | 6 ft·lbs |
| Turbocharger Lubrication Pipe Fastening Screws | 22 Nm | 16 ft·lbs |
| Screws for securing the turbocharger outlet pipe to the bracket | ||
| - 6 mm | 10 Nm | 7 ft·lbs |
| - 8 mm | 20 Nm | 15 ft·lbs |
| Turbocharger to exhaust manifold mounting screws | 50 Nm | 37 ft·lbs |
Diesel engine fuel supply system (Freelander 1)
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Article review: Konstantin Nazarov
Previous articles
Current article
Diesel engine fuel supply system
Next articles
Similar articles from Land Rover repair manuals:
• Fuel system (300 Tdi engine) Discovery 1 (1989-1998)
• Relieving pressure in the fuel supply system 4.0L Discovery 3 (2004-2009)
• Engine power supply system Range Rover 3 (2001-2012)
• Diagnostics and testing of the fuel supply system Defender 2007+ (2007-2016)
• Fuel system (300 Tdi engine) Discovery 1 (1989-1998)
• Relieving pressure in the fuel supply system 4.0L Discovery 3 (2004-2009)
• Engine power supply system Range Rover 3 (2001-2012)
• Diagnostics and testing of the fuel supply system Defender 2007+ (2007-2016)
No comments yet
Comments on this article