Right engine mount bracket assembly (Freelander 1)

Dismantling

1. Remove the lower engine guard.

EXTERIOR PARTS, REPAIR WORK, Lower engine protection shield.

2. Remove the bolt securing the upper right engine crossmember to the upper bracket on the engine.

3. Loosen the bolt securing the upper right engine crossmember to the body and move the crossmember away from the upper bracket.

4. Support the engine by placing a jack with a wooden block as a spacer under the pan.



5. Unscrew the nut securing the upper engine bracket to the right hydraulic support.

6. Unscrew the 2 bolts securing the upper bracket to the engine.

7. Remove the top bracket.

Installation

1. Install the top bracket.

2. Install the upper bracket mounting bolts to the front of the engine and tighten them to 170 Nm.



3. Lower the jack under the engine and remove the jack.

4. Screw the nut securing the upper engine bracket to the hydraulic support and tighten it. Tightening torque 85 Nm.

5. Install the upper right cross member onto the upper bracket, screw in the bolt and tighten it to 80 Nm.

6. Tighten the upper cross member mounting bolt to the body to a torque of 80 N·m.

7. Reinstall the lower engine guard.

EXTERIOR PARTS, REPAIR WORK, Lower engine protection shield.