Bottom of the tray gasket (Freelander 1)

Dismantling

1. Disconnect the negative battery terminal.

2. Drain the oil from the engine and remove the filter element from the oil filter housing.

MAINTENANCE, Engine oil and oil filter -Td4.

3. Unscrew the 16 pan mounting bolts.

4. Remove the pan and discard the gasket.

Installation

1. Check that the mating surfaces of the bottom and top of the pan are clean.

2. Place a new gasket on the bottom of the pan.

3. Install the lower part of the pan and tighten the mounting bolts to 10 Nm.

4. Insert a new lubrication system filter element and fill the engine with oil.

MAINTENANCE, Engine oil and oil filter -Td4.

5. Connect the negative battery terminal.