Air flow sensor (Discovery 1)

Note: A defective sensor cannot be repaired.

1. Disconnect the battery.

2. Disconnect the vacuum hose from the EGR valve actuator.



3. Disconnect the flow sensor connector.

4. Loosen the air hose clamp on the air cleaner side.

5. Remove the hose from the sensor.

6. Loosen the air hose clamp on the turbocharger side.

7. Remove the hose from the sensor.

8. Remove the sensor.

9. Installation is carried out in reverse order.

(The original source of the article is the website lrman.ru)