Dismantling
1. Disconnect "negative" battery terminal.
2. Remove a noise-insulating casing of the engine.
KV6 ENGINE - MODIFICATION K, Camshafts of the left cylinder head, Noise-insulating casing of the engine.
3. Release the vacuum booster from the clamps.
4. Disconnect the electrical connector from the solenoid valve, if installed.
5. Loosen and disconnect the vacuum tube.
6. Loosen the clamp and disconnect the vacuum hose from the intake manifold.
7. Release and remove the vacuum booster assembly from the intake manifold.
Installation
1. Install the vacuum booster on the intake manifold.
2. Connect it to the inlet pipe and secure with a clamp.
3. Connect the vacuum hose.
4. Connect the electrical connector to the solenoid valve, if installed.
5. Fasten the throttle to the clamps.
6. Replace the engine soundproof cover.
KV6 ENGINE - MODIFICATION K, Camshafts of the left cylinder head, Noise-insulating casing of the engine.
7. Attach "negative" battery terminal.
Comments on this article