Front differential bushing (Freelander 2)

Special tool

205-860-01 Remover, Differential Bushing	205-860-02 Remover, Differential Bushing	205-860-03 Installer, Differential Bushing
205-860-04 Installer, Differential Bushing	205-860-09 Installer, Differential Bushing	205-860-10 Spacer, Differential Bushing
LR-121 Hydraulic Cylinder 10t

Removal

1. Raise the vehicle.

WARNING: Ensure that the vehicle is supported securely.

2. Remove both rear wheels. Refer to procedure: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. Remove the rear differential. Refer to the procedure: Differential Case (205-02 Rear Drive Axle/Differential, Removal and Installation).

4. Using special tools, remove the bushing. Special tool: 205-860-01, 205-860-02, 205-860-10, LR-121

Mark the position of the components to facilitate subsequent installation. Mark the installation location of the components before removal.

The publication was copied from a web resource: LRMAN.ru

Installation

1. Using a special tool, crimp the bushing. Special tool: 205-860-09, 205-860-04, LR-121



2. Using special tools, install the bushing. Special tool: 205-860-10, 205-860-01, 205-860-04, 205-860-03, LR-121

CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.

NOTE: Make sure that the components are installed in the original positions marked during removal.

3. Install the rear differential. Refer to the procedure: Differential Case (205-02 Rear Drive Axle/Differential, Removal and Installation).

4. Install the rear wheels. Refer to the procedure: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).