WARNING: Place secure stands under the vehicle.
WARNING: Park the vehicle on level ground.
2. The working fluid from the rear differential is not completely drained. During the repair procedures, fluid will flow out. Substitute a container to collect the escaping liquid.
3. Make sure the vehicle is level. Remove the rear differential fill plug and discard the sealing washer.
4. Fill the rear differential until a thin stream of oil comes out of the filler hole. Refer to procedure: Specifications (205-02 Rear Drive Axle/Differential, Specifications).
5. Screw in the drain plug with a new washer. Tightening torque: 35 Nm
6. Lower the car.
Comments on this article