WARNING: Use caution when working near hot exhaust system components.
NOTE: The description of the removal procedure in this manual may include installation steps.
1. Raise and support the vehicle.
WARNING: It is forbidden to carry out work on a vehicle supported only by a jack. Be sure to install reliable supports under the car.
2.
3. Tightening torque: 35 Nm
CAUTION: Before disconnecting or removing components, clean the area around contact surfaces and connections. Plug all open connections to avoid contamination of the system.
Installation
1. Apply anti-seize lubricant to the sensor threads. Refer to procedure: Specifications (303-08, Specifications).
2. When installing, follow the removal procedure in reverse order.
Comments on this article