Centering the current collector (Discovery 1)

If the current collector is not centered during installation, the conductive paths may break, which will require replacement of the current collector.

Caution: When adjusting the position of the current collector, the steered wheels must be straight.

1. Install the current collector on the steering column, do not install the steering wheel or connect the connectors.

2. Without applying significant force, turn the current collector counterclockwise until it stops. Squeeze the latches of the current collector and insert them into the slots in the steering column.

Note: If the current collector rotates without restrictions, the conductive tracks are broken, replace the current collector.

3. Make sure that the current collector is on the stop, unscrew it 2.5 turns clockwise until it reaches the central position (from stop to stop the current collector makes 5 turns).

4. Connect the connectors and install the steering wheel.

5. Reinstall the removed parts.