Filling the RU amplifier system and removing air from it (Discovery 3)

1. Check the power steering fluid level.

2.

CAUTION: There must be fluid in the tank at all times while air is being removed from the system.

Remove the tank cap and fill the fluid to the MAX level mark. Replace the filler cap.



3. Start the engine, let it run for 10 seconds, then turn it off. Check the power steering fluid: if there are air bubbles in it, wait until the air comes out and add the recommended fluid to the upper level mark (UPPER).

4.

CAUTION: Do not hold the steering wheel in the lock position for more than 10 seconds.

Start the engine, turn the steering wheel from one extreme position to the other, turn off the engine. Check the power steering fluid level, top up if necessary.

5. Start the engine, let it run for 2 minutes, turn the steering wheel from one extreme position to the other. Check the power steering fluid level, top up if necessary.

The original article is located on lrman.ru