| Item name | Spare part catalog number | Description |
| 1 | - | Oil filter cover |
| 2 | - | Working element of the oil filter |
| 3 | - | Blow-off tube |
| 4 | - | Diaphragm |
| 5 | - | Spring |
| 6 | - | Blow-off tube |
| 7 | - | Crankcase ventilation system oil separator assembly |
| 8 | - | Turbocharger Inlet Filter |
| 9 | - | Bolt |
| 10 | - | Crankcase ventilation system drain tank assembly |
| 11 | - | Bolt |
| 12 | - | Crankcase ventilation system oil return pipe |
| 13 | - | Bracket |
| 14 | - | Bolt |
| 15 | - | Crankcase ventilation system oil return line assembly |
| 16 | - | Bolt |
| 17 | - | Bolt |
| 18 | - | Oil dipstick |
| 19 | - | Bolt |
| 20 | - | Return hose of the crankcase ventilation system |
| 21 | - | Cylinder head dowel pins |
| 22 | - | Plug |
| 23 | - | Sealing |
| 24 | - | Gearbox locating pin |
| 25 | - | Bolt, 2 pcs. |
| 26 | - | Cooling system inlet connector assembly |
| 27 | - | O-ring seal |
| 28 | - | Bolt |
| 29 | - | Crankshaft Position Sensor (CKP) |
| 30 | - | Cylinder Block Hole Cover |
| 31 | - | Bolt |
| 32 | - | Plug |
| 33 | - | O-ring seal |
| 34 | - | Crankshaft plug |
| 35 | - | Bolt |
| 36 | - | Bolt, 3 pcs. |
| 37 | - | Piston cooling nozzles |
| 38 | - | O-ring seal |
| 39 | - | Water pump |
| 40 | - | Bolt, 3 pcs. |
| 41 | - | Bolt, 3 pcs. |
| 42 | - | Water pump pulley |
| 43 | - | Plug |
| 44 | - | Hairpin, 3 pcs. |
| 45 | - | Coolant drain plug |
| 46 | - | Cylinder head dowel pins |
| 47 | - | Lower oil filter and oil cooler assembly |
| 48 | - | Sealing |
| 49 | - | Upper oil filter and oil cooler assembly |
| 50 | - | Bolt, 8 pcs. |
| 51 | - | Fuel cooler |
Cylinder block
The cylinders and crankcase are housed in a cylinder block, which is a hollow monoblock design made of grey cast iron. This design requires less material than a traditional cast iron cylinder block, reducing the weight and length of the engine.
[The material was taken from the specified website lrman.ru]
Comments on this article