Power steering pump reservoir (Discovery 1)

Removal

1. Remove the engine protection.

2. Place a container under the pump tank to collect the liquid.



3. Loosen the tank clamp bolt and lift the tank until the hose clamps are released.

4. Loosen the clamps, disconnect the hoses, and drain the liquid from the tank.

5. Remove the tank.

Caution: Do not refill the drained fluid. If liquid gets on painted surfaces, wipe the surface and rinse with warm water.

[The original article is located on: LRMAN.RU]

Installation

6. Installation is carried out in reverse order.

7. Fill the reservoir with fluid up to the "MAX" mark.

8. Bleed the system.